Introduction ida ReRouter

ida ReRouter

The ida ReRouter consists of two main programs:

-idaRoute (LU 6.2 to TCP/IP ReRouter for OS/2)

The function of the idaRoute is to act as link between the Host (SNA environment) and the TCP/IP protocol. In this way the Host will assume that communication with an LU 6.2 device has been established. Based on the defined LU Alias (which must be the equivalent of the one defined in Communications Manager/2), the idaRoute sends print data and printer information transparently through the TCP/IP network.

-idaRCtrl

Control program for idaRoute with two functions:

-setting up the routes

-showing the status of the defined routes (active/inactive)

Status of the defined route names will appear from the status field in the idaRoute main screen. (See the idaRoute main screen on page 15).

1.2Product Features

The ida ReRouter provides the following features:

The ida ReRouter transaction program performs direct host print from e.g. S/370-390 or AS/400 to the following products:

-ida PrintServer 13

-ida PrintServer 14

-ida RPPC with TCP/IP for Sinix

With connections to PCL 4/5 printers.

-ida 913-03 Token Ring LAN Brick

-ida 913-04 Ethernet LAN Brick

-i-data 7913-03 Token Ring LAN Attachment

-i-data 7913-04

Ethernet LAN Attachment

With connections to IPDS Laser / Matrix printers for Coax or Twinax environments.

Host applications:

The ida ReRouter supports a number of host applications. For details see section 3.1 “Host System Requirements”.

Supports LAN attached TCP/IP products

Supports up to 32 sessions

9

Page 9
Image 9
I-Data ReRouter instruction manual Product Features, IdaRCtrl, With connections to PCL 4/5 printers