Testing Connection to Remote Device ida ReRouter

PING function succeeded:

If the PING is OK, you receive a system response like this:

PING 192.0.5.7: 56 data bytes

64 bytes from 192.0.5.7: icmp_seq=0. time=0. ms

64 bytes from 192.0.5.7: icmp_seq=1. time=0. ms

64 bytes from 192.0.5.7: icmp_seq=2. time=0. ms

64 bytes from 192.0.5.7: icmp_seq=3. time=0. ms

64 bytes from 192.0.5.7: icmp_seq=4. time=0. ms

----- 192.0.5.7 PING Statistics ----------

4.Press CTRL-BREAK to end the PING process and receive the followng message:

5 packets transmitted, 5 packets received, 0% packet loss round-trip (ms) min/avg/max 0 / 0 / 0.

PING function failed:

If the PING function failed to provide the expected system response, you should check the remote device as follows:

1.Make sure that power light on the remote device is ON and that the LAN light is ON (solid, not blinking). This means that the unit is connected to the LAN.

2.Press the TEST key on the remote printer device. A test page is generated on the printer.

NOTE: When you press the TEST key, you make a disconnection between the printer and the ida ReRouter. To restart, you simply send another job to this device.

If you need further instructions on how to PING the remote device, you are referred to the relevant TCP/IP documentation for the host you are using.

60

Page 60
Image 60
I-Data ReRouter instruction manual Ping function succeeded, Ping function failed