I-Data ReRouter - page 57

Testing Connection to Remote Device
ida ReRouter
57
7.2 LAPS
When installing TCP/IP, a LAPS (LAN Adapter Protocol Support) protocol
must be added for the TPC/IP in question.
First select network adapter and then add the protocol for the TCP/IP as
illustrated in the screen below. The selected protocol will then appear in
the field "Current Configuration".
Press "OK" to confirm the configuration.
7.3 TCP/IP
The TCP/IP (Transmission Control Protocol / Internet Protocol) is used to
transfer print data. The print data is encapsulated within the TCP/IP
during network transmission and is passed transparently to the remote
device.
When configuring the TCP/IP there are two parameters to define:
- network
- routing this, however, is only in case of multiple IP network
connection