I-Data ReRouter instruction manual Trace, ROUT0803E Thread handling error

Problem Determination ida ReRouter

ROUT0803E:	Thread handling error [...]
Description:	An OS/2 system call has failed.
Action:	Re-start the ida ReRouter, re-start the OS/2.
Note:	If problem persist, contact your system administrator.
	-

9.2 Trace

The Trace entry in the setup screen (see chapter 4: "Installation and Setup of ida ReRouter”) provides a debugging facility.

This facility can be enabled either by setting "TRACE" to a value within the defined range (see below) in the setup screen or set via the configuration file (idaRoute.ini). When TRACE has been enabled, an <LUALIAS>. trc will be generated to the directory of the idaRoute program.

Range: '0' (Off)

'???? 0010 1' (Dataflow, trace file wrapped [128kB]) '???? 0010 0' (Dataflow, trace file not wrapped)

Default: '0' (OFF)

NOTE: The trace file is basically for internal i-data use only.

68