Dell 1900 E1913 CPU & Firmware, Mismatch, E2010 No Memory, E2011 Mem Config Err, E2014 Cmos Fail

Table 1-4. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1913	CPU & Firmware	The BMC firmware does not	Update to the latest BMC
	Mismatch	support the CPU.	firmware. See the BMC User’s
			Guide for more information on
			setup and use of BMC.
E2010	No Memory	No memory is installed in the	Install memory. See "Memory" on
		system.	page 80.
E2011	Mem Config Err	Memory detected, but is not	See "Troubleshooting System
		configurable. Error detected	Memory" on page 110.
		during memory configuration.
E2012	Unusable Memory	Memory is configured, but not	See "Troubleshooting System
		usable. Memory subsystem	Memory" on page 110.
		failure.
E2013	Shadow BIOS Fail	The system BIOS failed to copy	See "Troubleshooting System
		its flash image into memory.	Memory" on page 110.
E2014	CMOS Fail	CMOS failure. CMOS RAM not	See "Getting Help" on page 131.
		functioning properly.
E2015	DMA Controller	DMA controller failure.	See "Getting Help" on page 131.
E2016	Int Controller	Interrupt controller failure.	See "Getting Help" on page 131.
E2017	Timer Fail	Timer refresh failure.	See "Getting Help" on page 131.
E2018	Prog Timer	Programmable interval timer	See "Getting Help" on page 131.
		error.
E2019	Parity Error	Parity error.	See "Getting Help" on page 131.
E201A	SIO Err	SIO failure.	See "Getting Help" on page 131.
E201B	Kybd Controller	Keyboard controller failure.	See "Getting Help" on page 131.
E201C	SMI Init	System management interrupt	See "Getting Help" on page 131.
		(SMI) initialization failure.
E201D	Shutdown Test	BIOS shutdown test failure.	See "Getting Help" on page 131.
E201E	POST Mem Test	BIOS POST memory test failure.	See "Troubleshooting System
			Memory" on page 110. If problem
			persists, see "Getting Help" on
			page 131.

20

About Your System