Figure 3-24. Installing and Removing a Processor
34
2
1
5
1 | socket key (2) | 2 | ZIF socket | 3 | processor |
4 |
| 5 | processor shield |
|
|
13Lift the processor out of the socket and leave the release lever up so that the socket is ready for the new processor.
NOTICE: Be careful not to bend any of the pins on the ZIF socket when removing the processor. Bending the pins can permanently damage the system board.
14Unpack the new processor.
15Align the processor with the socket keys on the ZIF socket. See Figure
16Install the processor in the socket.
NOTICE: Positioning the processor incorrectly can permanently damage the system board or the processor when you turn it on. When placing the processor in the socket, be careful not to bend the pins in the socket.
aIf the release lever on the processor socket is not positioned all the way up, move it to that position.
bWith the processor and the socket keys aligned, set the processor lightly in the socket, making sure all pins are matched with the correct holes in the socket.
90
