Jumpers and Connectors
This section provides specific information about the system jumpers and describes the connectors on the various boards in the system.
System Board Jumpers
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
Figure 6-1 shows the location of the configuration jumpers on the system board. Table 6-1 lists the jumper settings.
NOTE: To access the jumpers, remove the center fans and the center fan bracket. See "Removing and Installing a Fan" on page 53 and "Removing the Center Fan Bracket" on page 79.
