Table
Message | Causes | Corrective Actions |
|
|
|
BIOS Update Attempt | Remote BIOS update attempt failed. | Retry the BIOS update. If problem |
Failed! |
| persists, see "Getting Help" on page 131. |
|
|
|
Caution! NVRAM_CLR jumper | NVRAM_CLR jumper is installed. | Remove the NVRAM_CLR jumper. See |
is installed on system | CMOS has been cleared. | Figure |
board. |
|
|
|
|
|
CPUs with different cache | Microprocessors with different cache | Ensure that all microprocessors have the |
sizes detected! | sizes are installed. | same cache size and that they are |
|
| properly installed. See "Microprocessor" |
|
| on page 87. |
Decreasing available memory
DIMM pairs must be matched in size, speed, and technology. The following DIMM pair is mismatched: DIMM x and DIMM y.
Faulty or improperly installed memory modules.
Mismatched or unmatched DIMMs installed; faulty or improperly seated memory module(s).
See "Troubleshooting System Memory" on page 110.
Ensure that all pairs of memory modules are of the same type and size and that they are properly installed. See "Memory" on page 80. If the problem persists, see "Troubleshooting System Memory" on page 110.
DIMMs must be populated in sequential order beginning with slot 1. The following DIMM is electrically isolated: DIMM x.
The specified DIMM is inaccessible to | Populate 2, 4, or 8 DIMMs sequentially |
the system due to its location. DIMMs | beginning with slot 1. See "Memory" on |
must be populated in sequential order, | page 80. |
beginning with slot 1. |
|
DIMMs should be installed in pairs. Pairs must be matched in size, speed, and technology.
Mismatched or unmatched DIMMs installed; faulty or improperly seated memory module(s). The system will operate in a degraded mode with reduced ECC protection. Only memory installed in channel 0 will be accessible.
Ensure that all pairs of memory modules are of the same type and size and that they are properly installed. See "Memory" on page 80. If the problem persists, see "Troubleshooting System Memory" on page 110.
Mismatched DIMMs installed; faulty memory module(s). The system has detected a
Ensure that all pairs of memory modules are of the same type and size and that they are properly installed. See "Memory" on page 80. If the problem persists, see "Troubleshooting System Memory" on page 110.
24
