I-Data ReRouter instruction manual ROUT0611I Trace enabled, ROUT0612W Swiddef file error

Problem Determination ida ReRouter

ROUT0611I:	Trace enabled [...]
Description:	Program trace is enabled.
Action:
Note:	Trace information is written to the <LUALIAS>.trc
	file. (see section 9.2: "Trace" for further information).
ROUT0612W: SWIDDEF file error [...]
Description:	The swiddef is either invalid or non-existing.
Action:	Re-install or update the ida ReRouter.
Note:	If problem persists then contact your point of purchase.
	-

ROUT0613I:	Printer is not ready (IRQ on remote printer)
Description:	An IRQ message has been discovered in the
Action:	remote printer.
	Check the remote printer to establish the IRQ
Note:	situation (paper jam, paper out, off-line?).
	-

ROUT0614I:	Printer is ready (IRQ solved)
Description:	Information only.
Action:	-
Note:	-
ROUT0615E:	TCP/IP printer protocol error
Description:	A protocol error has occurred between the
Action:	ida ReRouter and the remote device.
	Check the remote device and retry.
Note:	-
ROUT0616I:	Connection established to [...] port [...]
Description:	A connection has been established to the IP
Action:	address [...], port no. [...].
	-
Note:	Information only.

66