ZyXEL Communications ES-2024PWR, ES-2048 How do I configure an IP address? From Web Configurator

ES-2000 Series Switch Support Notes

emulation software.

2.Power off and then power on the Switch, and press any key to enter the debug mode when the screen shows “Press any key to enter Debug Mode within 3 seconds.”

3.Type “atlc” and press the enter key

4.When the message “starting XMODEM upload” appears, do XMODEM upload of the default rom file to the Switch

5.After it is done uploading the rom file successfully, type “atgo” to leave the debug mode.

6.The system will be restarted automatically. After the system is up, you should be able to log in with the default password “1234” and the IP address is now 192.168.1.1.

How do I configure an IP address?

From Web Configurator:

Click Basic Setting and then IP Setup to display the next screen. *ES-2000 series does NOT have the Out-of-band Management interface. *ES-2048 is an exception; it has an Out-of Band Management interface.

85

All contents copyright (c) 2006 ZyXEL Communications Corporation.