Setup and Installation | 2 |
|
Before you can run Server Diagnostics, you must set up your testing environment and install Server Diagnostics.
Make sure you meet Server Diagnostics requirements before attempting setup and installation. For information, see “Requirements” on page 9.
Server Diagnostics EFI is preinstalled on the server. The instructions in this chapter show you how to install Server Diagnostics in a different location or set up
a NetBoot server.
Setting Up a Storage Device for Server Diagnostics Installation
To set up an internal volume or portable storage device for Server Diagnostics installation, you need at least 100 MB of available space for Server Diagnostics EFI or at least 10 GB of available space for Server Diagnostics Mac OS X, which requires installing Mac OS X Server. These requirements are described in detail in “Storage Device Requirements” on page 9.
If you’re installing Server Diagnostics Mac OS X on a volume, the storage device should use the GUID Partition Table partition map scheme.
To view the storage device’s partition map scheme, open Disk Utility and select the storage device. Make sure you select the storage device and not a volume within the storage device.
At the bottom of the Disk Utility window, Partition Map Scheme should be GUID Partition Table.
To repartition an
11