Apple 3X108 manual Bluetooth Tests, Ethernet Controller Tests

Bluetooth Tests

Test	Estimated completion time	Description
Bluetooth USB Interface	1 second	Verifies USB interface between
		host and Bluetooth.
MAC Address Verification	1 second	Verifies MAC address isn’t all FFs
		or 00s.
Bluetooth Power Cycle	10 seconds	Verifies USB interface between
		host and Bluetooth after turning
		Bluetooth power off and then
		turning Bluetooth power on.

Ethernet Controller Tests

Data loop tests can add to network traffic. Consider disconnecting from the network before running data loop tests.

Test	Estimated completion time	Description
MAC Address Verification	1 second	Verifies MAC address isn’t all FFs
		or 00s.
MAC Loopback	25 seconds	Verifies that there’s no data
		mismatch between sent and
		received data while looping
		within the MAC (a sublayer of
		the datalink layer in the ISO
		network reference model).
PHY 1000 Loopback	25 seconds per port	Verifies that there’s no data
		mismatch between sent and
		received data while looping
		within the physical transport
		medium (PHY) at 1000 Mbps.
PHY Jumbo Packet Loopback	25 seconds per port	Verifies that there’s no data
		mismatch between sent and
		received jumbo packet data
		while looping within the
		physical transport medium
		(PHY) at the the highest
		supported speed.

Appendix    Server Diagnostics Test Reference

45