Apple 3X108 manual Server Diagnostics Mac OS X Tests

Page 44

Server Diagnostics Mac OS X Tests

These tests are available if your server is running Server Diagnostics Mac OS X.

Startup Tests

These tests run when you start up Server Diagnostics Mac OS X.

Test

Estimated completion time

Description

Hardware Existence

1 second

Compares a table of sensors and

 

 

fans with what’s connected to

 

 

the logic board. If a sensor or

 

 

fan isn’t found, an error occurs.

 

 

Sensors, and hard drives found

 

 

can be individually tested using

 

 

sensor, hard drive tests.

 

 

 

SMBIOS Self-Test

1 second

Checks the SMBIOS tables for

 

 

32-bit errors (type 18) and 64-

 

 

bit errors (type 33). Also verifies

 

 

that the mapped-in DIMM size

 

 

is appropriate for the slot it’s

 

 

inserted into. If there’s a size

 

 

mismatch, an error occurs.

 

 

When the server tests memory

 

 

at startup, it maps out bad

 

 

memory. The SMBIOS test

 

 

reports these mapped-out

 

 

DIMMS.

 

 

 

AirPort Tests

Test

Estimated completion time

Description

AirPort MAC Address Verification

1 second

Verifies MAC address isn’t all FFs

 

 

or 00s.

 

 

 

AirPort Power Cycle

5 seconds

Verifies AirPort by performing

 

 

a wireless scan after turning

 

 

AirPort power off, then turning

 

 

AirPort power on.

 

 

 

44

Appendix    Server Diagnostics Test Reference

Image 44
Contents Apple Server Diagnostics User Guide Apple Contents Appendix Server Diagnostics Test Reference Overview and Requirements ÂÂ USB ports ÂÂ Video controllerOverview and Requirements Overview of Server Diagnostics Configurations Option ConsiderationsAdmin Tools disc Requirements General RequirementsStorage Device Requirements Order to You needNetBoot Server Requirements Local and Remote RequirementsSetup and Installation NetBoot serverTo create and format empty storage device volumes To do this Do thisInstalling Server Diagnostics EFI To install Server Diagnostics EFITo restore Server Diagnostics EFI Restoring Server Diagnostics EFIInstalling Server Diagnostics Mac OS To install Server Diagnostics Mac OS Setting Up a NetBoot Server System Preferences pane Recommended configurationTo set up a NetBoot server Open Server Admin located in /Applications/ServerDeleting the Server Diagnostics NetBoot Image To delete the Server Diagnostics NetBoot imageChanging the Startup Disk Goal Hold down this key at server startupTo change the startup disk in System Preferences Changing the Startup Disk Using the Command-Line InterfaceChanging the Startup Disk in System Preferences Changing the Startup Disk Temporarily at Startup Changing the Startup Disk Using Apple Remote DesktopTo change the startup disk using the command-line interface To temporarily change the startup disk at startup Disabling the Firmware PasswordTo disable the firmware password Starting Up Server Diagnostics Using Server Diagnostics Setting Server Diagnostics to Host, Client, or Local ModeFollowing table describes the three modes Remotely Testing a Client ServerMode Description To remotely test a client server Testing the Local Server Using Server Diagnostics EFI Testing the Local Server Using Server Diagnostics Mac OSTo test the local server using Server Diagnostics EFI To test the local server using Server Diagnostics Mac OSUsing Server Diagnostics EFI ÂÂ Shut down the serverCustomizing Server Diagnostics EFI Test Settings To customize Server Diagnostics EFI test settingsServer Diagnostics EFI, select the test settings you want To run the test, click TestClearing the Test Log Viewing the Hardware ProfileShutting Down or Restarting the Server Viewing Saved LogsTo take a screenshot Using Server Diagnostics Mac OSTaking Screenshots Customizing Server Diagnostics Mac OS X Test Settings To customize Server Diagnostics Mac OS X test settingsTest group Test selections Working with Test GroupsTo work with test groups Viewing Logs To view logsLog type Description Color StatusSetting Log Preferences Appended values use this formatQuitting Server Diagnostics Mac OS X While a Test Is Running To set log preferencesComparison of Available Tests % indicates that a test is availableServer Diagnostics EFI Tests These tests run when you start up Server Diagnostics EFIStartup Tests Test Estimated completion time DescriptionOr 00s AirPort TestsEthernet Controller Tests Hard Drive Tests Memory TestsMulticore Memory Tests Extended Memory Tests Power Supply Tests Processor TestsSensor Tests SMC PID Sensor TestsServer Diagnostics Mac OS X Tests These tests run when you start up Server Diagnostics Mac OSBluetooth Tests SSD Threaded Media Scan Not available SMC PID Sensor Second Checks the SMC PID sensor Behavior Video Controller Tests