SpectraLink Corporation | Installation, Configuration, and Administration |
| NetLink SVP Server (within IP environments) |
When the name services are set up correctly, the NetLink SVP Server can translate hostnames to IP addresses. Using telnet, it is also possible to access the NetLink SVP Server using its hostname instead of the IP address.
Workgroup
As set in WINS.
Syslog Server
Logging can be set to Syslog or NONE. If Syslog is set, a message is sent to the syslog server when an alarm is triggered.
Disable Telnet Service
Prevents Telnet access into the SVP Server. Reset the SVP Server for the change to take effect. Upon reset the Telnet protocol server is not started.
The NetLink SVP Server must be reset in order to set the configuration options. If the NetLink SVP Server is in Maintenance Lock, you must manually reset it by selecting the Reset option in the
PN: | Page 20 |