SpectraLink SVP020, SVP100, SVP010 manual Software Version

Page 33

SpectraLink Corporation

Installation, Configuration, and Administration

 

NetLink SVP Server (within IP environments)

7.3Software Version

The NetLink SVP Server and wireless telephones utilize SpectraLink Corporation’s proprietary software that is controlled and maintained through versioning. The Software Version screen provides information about the version currently running on the NetLink SVP Server. This information will help you determine if you are running the most recent version and will assist SpectraLink engineering and/or customer support in troubleshooting software problems.

This screen also displays the model type.

From the System Status Menu, select Software Version. A sample screen is displayed here.

Note that the software versions on your system may be different from the versions displayed in the above sample screen.

The table below shows the description, major version numbers, and filenames of the files that are provided when downloading updates.

Name

Major Version

Filename

Number

 

 

 

 

 

Table of contents

173

svp100.toc

 

 

 

Functional code

174

zvmlinux

 

 

 

File system

175

flashfs

 

 

 

The minor version numbers for these three files must all match, as they do in the screen example (17x.024).

PN: 72-0178-01-F.doc

Page 33

Image 33
Contents NetLink SVP Server Installation, Configuration, and AdministrationSVP100 SVP020 SVP010 For Cisco and Mitel IP environmentsSVP Trademark InformationImportant Safety Information Table of Contents SpectraLink Corporation Model Numbers About This DocumentRelated Documents Customer Support HotlineNetLink SVP Server Overview SpectraLink Voice Priority SVP and Quality of ServiceSVP Server Models Timing FunctionMultiple NetLink SVP Server Capacities Multiple SVP Servers/Master SVP ServerNetLink SVP010 and SVP020 Server Capacity NetLink SVP100 Server CapacitySVP SpectraLink Corporation IP telephony system example System DiagramAdministrative computer Ethernet switchSystem Components RouterTftp Server Link LEDs Front Panel of the NetLink SVP ServerInstall the NetLink SVP Server Installing the NetLink SVP ServerRequired Materials Locate the NetLink SVP ServerConnect Power Mount the NetLink SVP Server to a wallConnect NetLink SVP Server to LAN Connecting to the NetLink SVP Server Configuring the NetLink SVP ServerConnecting Via Telnet Connect via the Serial PortNetLink SVP-II System Menu SendAll Network ConfigurationNetwork administrator must define the subnet mask As set in Wins SVP Server Configuration Phones per Access Point  Alias IP Addresses are not necessary in Cisco systems Default value as shown in the table below will be used QoS ConfigurationRTP Change Password Adding an SVP Server Swapping/Adding/Deleting SVP ServersRemoving an SVP Server Changing the Master SVP ServerSoftware Updates Software MaintenanceTroubleshooting via System Status Menu Alarm Text Action Error StatusNetwork Status SpectraLink Corporation Software Version Gatekeeper Database Index