SpectraLink Corporation | Installation, Configuration, and Administration |
| NetLink SVP Server (within IP environments) |
7.1Error Status
The Error Status screen displays any alarms that indicate some system malfunction. Some of these alarms are easily remedied and others require a call to SpectraLink’s Customer Support Department.
From the System Status Menu, select Error Status. The screen displays active alarms on the NetLink SVP Server.
The following table displays the list of alarms and a description of the action to take to eliminate the alarm.
Alarm Text | Action |
|
|
Maximum payload usage reached | Reduce usage, clear alarm |
|
|
Maximum telephone usage reached | Reduce usage, clear alarm |
|
|
Maximum access point usage reached | Reduce usage, clear alarm |
|
|
Maximum call usage reached | Reduce usage, clear alarm |
|
|
SRP audio delayed | Reduce usage, clear alarm |
|
|
SRP audio lost | Reduce usage, clear alarm |
|
|
No IP address | Configure an IP address |
|
|
Press C to clear all clearable alarms.
PN: | Page 30 |