Thecus Technology N8800 user manual UPS Settings, Wake-Up On Lan WOL, Ups

If a corrupt print job is sent to a printer, printing may suddenly fail. If your print jobs seem to be locked up, pressing the Remove All Documents button to clear the print queue may resolve the issue.

For information on how to set up the Printer Server, refer to Chapter 5: Additional Feature Setup > Printer Server.

UPS Settings

The N8800 can also support various uninterruptible power supply units, providing extra data security and accessibility in the case of a power failure.

From the Status menu, choose the UPS item and the UPS Setting screen appears. Make any changes you wish, and press Apply to confirm changes. See the following table for a detailed description of each item.

UPS Settings

Item	Description
UPS Monitoring	Enable or disable UPS monitoring.
Manufacturer	Choose the UPS manufacturer and model number
	from the dropdowns.
Battery Status	Current status of the UPS battery
Power	Current status of the power being supplied to the
	UPS
Seconds between power failure and	Delay between power failure and first notification
first notification	in seconds.
Seconds between subsequent power	Delay between subsequent notifications in
failure notifications	seconds.
Shutdown the system when the	Amount of UPS battery remaining before system
battery charge is less than	should auto-shutdown.
Apply	Press Apply to save your changes.

For a list of supported UPS units, see Appendix E: UPS Compatibility List.

Wake-Up On Lan (WOL)

The N8800 has the ability to be awoken from sleep mode via WAN port.

From the Status menu, choose the WOL item, and the Wake-up On Lan Configuration screen appears. From here, you can Enable or Disable.

25