Thecus Technology N8800 System Settings, System Notifications, Notification Configuration

System Settings

The System menu gives you a wealth of settings that you can use to configure your N8800’s system administration functions. You can set up system notifications, view system logs, and even upgrade firmware from this menu.

System Notifications

From the System menu, choose the Notification item, and the Notification Configuration screen appears. This screen lets you have the N8800 notify you in case of any system malfunction. Press Apply to confirm all settings. See following table for a detailed description of each item.

NOTE

Consult with your mail server administrator for email server information.

Notification Configuration

Item	Description
Beep Notification	Enable or disable the system beeper that beeps when a problem
	occurs.
Email Notification	Enable or disable email notifications of system problems.
SMTP Server	Specifies the hostname/IP address of the SMTP server.
Port	Specifies the port to send outgoing notification emails.
Auth Type	Select the SMTP Server account authentication type.
SMTP Account ID	Set the SMTP Server Email account ID.
Account Password	Enter a new password.
Confirm Account	Confirm a new password.
Password
Receiver’s E-mail	Add one or more recipient’s email addresses to receive email
Address	notifications.
Test E-Mail	Click to send out a test e-mail to make sure the settings are
	correct.

SNMP

From the System menu, choose the SNMP item and the SNMP Supports screen appears. You could enable the SNMP function and filled in the related information in each fields. With the SNMP management software could get system basic information.

59