Spring Switzerland GmbH Ver. 1.61 Function Create new target, Function Chap User Target Access

34

Function “Create new target”

To create a target assign a name or leave the "Target Default Name" option checked. Target name can contain alphanumeric characters: ' . ' ' : ' - '

A target name is considered case-insensitive. Every character entered will be converted to low-case. No spaces and no underscores are permitted.

The server name will be used as a part of the default target name

In this function you can create new targets, which will be seen in client stations as logical disks. You can change the name of any target.

After creating new target (see below) there will be created a new branch: “target0”

Function: CHAP User Target Access

Add CHAP users that are granted to access to this target.

You can use following keyboard keys in the lists (first set focus to desired list):

oHome: jump to the first o End: jump to the last

o Shift + arrow key: for multi-select

o letter key: jump to the first position starting with pressed key

If you enable CHAP user access authentication but will not select any users to have access, then nobody will have access to the Target.

Additionally you can set password required to establish connection of iSCSI Initiator to iSCSI Target Server.

To do this please use the function iSCSI Access Password situated in setup -> target manager -> targets.

The Microsoft iSCSI software initiator requires using password from 12 to 16 alphanumerical characters.