Spring Switzerland GmbH Ver. 1.61 manual Function S/W RAID E-mail notification

Page 53

53

Function: “S/W RAID E-mail notification “

It is possible to send notification by e-mail about events on software RAID arrays (e.g. rebuild started, rebuild finished, span is active). In order to do so please check Send array events.

In order to “Send array events” you must enable E-mail notification in “setup” Æ “administrator”.

•If you check "Include resyncing/recovering progress" - you will be informed about progress of resync/rebuild if it is currently running. An e-mail will be send for every 20 % completed.

•If you check "Include array status" - to every event will be added the status of event-related array.

After choice Raid Levels and by clicking “apply” button appear in field “Status” “in use” (see below)

By clicking on the branch “MD0” appears new page, with Functions Manager, Info and Software RAID unit remove.

Image 53

Contents Manual Ver .61 May 02 Configuration Hardware installationBefore you get started Description of functionsTroubleshooting Guide Appendix a Appendix B Disclaimer CopyrightTrademarks System requirements Content of this packageBefore you get started Supported clients Safety precautionsSupported network protocols Required toolsWhat is iSCSI? FeaturesWhy Open-E iSCSI? Description of the functionsRAID types Getting ready Hardware installationInstalling Open-E iSCSI Page First-time operation of Open-E iSCSI ConfigurationBasic configuration of the iSCSI computer Logging into Open-E iSCSI Enterprise Page Create RAID Units Adding Disk Units Creating iSCSI targets volumePage Configuring end user workstation How to connect iSCSI in Windows 2000/XP/2003 Description of functions F1, F2 and F5 Functions of Open-E iSCSI via browser accessShutting down and restarting ServerNetwork Function Language SettingsFunction Ipsec Function IP addressFunction Bonding Set bondingPrimary AdministratorMii Function Administrator Access Function Administrator PasswordFunction E-mail notification Function USE Snmp How to retrieve information from SNMP?Function SSL Certificate Authority You can get information by Function Remote accessHardware Function UPS configuration Function Clock settings Function Set time Function Power button settingsFunction Motherboard info Target Manager Function Unit ManagerFunction Units Assigned Function iSCSI Volume ManagerFunction Disks Localizer Function Number of snapshots Function Snapshot definition Function Create new target Function Chap User Target AccessFunction Target IP Access Function Target Volume ManagerFunction Target Remove Function Chap User Target Snapshot AccessFunction Target Rename Function Create new Chap user Function Target Snapshot AccessFunction Snapshot rename Function Delete Chap user Function Edit Chap userUsing snapshot with Open-E iSCSI Function System Restart Shutdown Function System ShutdownFunction Schedule for shutdown Miscellaneous Function Connection resetSnapshot Software Update During update from CD please follow this steps Function Update downloaderFailed 2.5 S.M.A.R.T Function S.M.A.R.T. e-mail notificationHardware Page Function S.M.A.R.T. unit’s health status 3.3 S.M.A.R.TFunction S.M.A.R.T. info 4.1 H/W Raid Function 3ware administrationsFunction S.M.A.R.T. test Fibre Channel Function Qlogic administration4.3 S/W Raid Function Create new S/W RAID unitAvailable Raids RAID 6 layout parity-algorithm RAID 5 layout parity-algorithmFunction S/W RAID E-mail notification RAID Function „ManagerFunction „Software RAID unit remove Function „InfoPage Open-E iSCSI does not boot, keyboard LEDs are flashing Troubleshooting GuideError values are not valid Error passwords do not matchOpen-E Software License agreement Appendix aOwnership and Copyright Intellectual Property RightsDisclaimer of Warranties Authorized ServiceLimitation of Liability WaiverGNU General Public License Appendix BPage Page Page Page Page No Warranty How to Apply These Terms to Your New Libraries