Promise Technology TX Series Serial ATA Controller Cards, SATA 300 SATAII150 TX Series Task List

Page 2

SATAII150 and SATA300 TX Series Quick Start Guide

SATAII150 TX Series Task List

Installation and setup consists of the following steps:

1.Unpack Your SATAII150 or SATA300 Card, below

2.Install the SATAII150 or SATA300 Card (page 3)

3.Install the Disk Drives:

SATAII150 TX2plus or SATA300 TX2plus (page 4) SATAII150 TX4 (page 5)

SATA300 TX4 (page 7)

4.Install Driver (page 9)

Step 1: Unpack Your SATAII150 or SATA300 Card

When you receive the SATAII150 or SATA300 TX2plus card, the package should contain the items listed below:

SATAII150 or SATA300 TX2plus Serial ATA Controller card

Quick Start Guide

Two 0.65 m (26 inch) Serial ATA data cables. 1.5 Gb cables for SATAII150, 3.0 Gb cables for SATA300

One 80-wire 40-pin ATA cable

CD with drivers and SATAII150 and SATA300 TX Series User Manual

When you receive the SATAII150 or SATA300 TX4 card, the package should contain the items listed below:

SATAII150 or SATA300 TX4 Serial ATA Controller card

Quick Start Guide

Four 0.65 m (26 inch) Serial ATA data cables. 1.5 Gb cables for SATAII150, 3.0 Gb cables for SATA300

CD with drivers and SATAII150 and SATA300 TX Series Manual

If ANY of the contents are missing or appear to be damaged, please contact your dealer or distributor immediately.

Warning

Before installing the adapter into an existing system, backup any important or useful data. Failure to follow this accepted PC practice could result in data loss.

2

Image 2
Contents SATAII150 and Sata SATAII150 TX Series Task List Unpack Your SATAII150 or SATA300 CardInstall the SATAII150 or SATA300Card SATA300Install the Disk Drives SATAII150 or SATA300 TX2plusSATAII150 TX4 SATAII150 TX4 SATA300 TX4 SATA300 TX4 Serial ATA Controller card Install Drivers Make an Installation Floppy Diskette WindowsNew Installation Windows ServerConfirm Installation Windows XPWindows Existing Installation RedHat Linux SuSE Linux Existing Installation