SATAII150 and SATA300 TX Series Quick Start Guide
3.Attach one Serial ATA data cable to each Serial ATA disk drive. Then attach the other ends of the cables to the connectors on the SATA300 TX4 card (below).
Port 1 /
Channel 1 Individual LED Aggregate LED
Connectors Connectors
Port 2 / | Management |
Channel 2 | Connector |
| Port 3 / |
| Channel 3 |
| Port 4 / |
| Channel 4 |
| TX4 |
| ATA 300 |
SATA300 TX4 Serial ATA |
|
Controller card |
|
8