Promise Technology VTrak external disk array subsystem, m210p, m310p manual Snmp

Chapter 4: Management with WebPAM PROe

SNMP

VTrak's SNMP service enables the SNMP browser to obtain information from the VTrak. The Trap Sink is where SNMP events are sent and can be viewed.

To change the SNMP settings:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the SNMP Management link.

4.Enter the SNMP Port number.

161 is the default.

5.Enter a System Name. There is no default name.

6.Enter a System Location. USA is the default.

7.Enter a System Contact (the email address of the administrator or other individual).

8.Enter the Read Community Public is the default.

9.Enter the Write Community Private is the default.

10.Enter a Trap Sink IP address.

11.Select a Trap Filter and click on its option.

12.Tap sinks of the selected Severity level and above will be sent.

13.Click on the Update button and review your Trap Sinks.

14.When you are done, click on the Submit button.

15.Click OK in the confirmation box to restart the SNMP service with your changes.

Change Start Setting

To change the SNMP Automatic/Manual start setting:

1.Click the Subsystem icon in Tree View.

2.Click the Administrative Tools icon.

3.Click on the SNMP Management link.

4.Under Startup Type:

•Click on the Automatic option to start the service automatically during system startup.

69