Promise Technology M300p, M500i, M500p CLI Fibre Channel and Scsi Models M500f/p, M300f/p, M200f/p

VTrak M-Class Product Manual

CLI: Fibre Channel and SCSI Models (M500f/p, M300f/p, M200f/p)

1.Type the following string to set the Date and Time, then press Enter administrator@cli> date -a mod -d 2005/06/08 -t 16:45:00

Type the date in yyyy/mm/dd format and the time in hh/mm/ss format with a 24-hour clock. In the above example, the date was June 8, 2005. The time was 4:45 pm. Your values will be different.

2.Type the following string to set the Management Port IP address and other settings, then press Enter.

administrator@cli> net -a mod -t mgmt -s "primaryip=192.168.10.87, primaryipmask=255.255.255.0, gateway=192.168.10.3"

In the above example, the IP addresses and subnet mask are included as examples only. Your values will be different.

If you prefer to let your DHCP server assign the IP address, type the following string, then press Enter.

administrator@cli> net -a mod -t mgmt -s "dhcp=enable"

3.To verify the settings, type net, and press Enter. administrator@cli> net

===========================================

CId Port Type IPMask Gateway Link

===========================================

1 1 Mgmt 192.168.10.87 255.255.255.0 192.168.10.3 Up

This completes the Management port setup. Go to “VTrak Setup with WebPAM PROe” on page 41.

To see the full set of CLI commands, at the admin@cli> prompt, type help, and press Enter.

CLI: iSCSI Models (M500i, M300i, M200i)

1.Type the following string to set the Date and Time, then press Enter administrator@cli> date -a mod -d 2005/06/08 -t 16:45:00

Type the date in yyyy/mm/dd format and the time in hh/mm/ss format with a 24-hour clock. In the above example, the date was June 8, 2005. The time was 4:45 pm. Your values will be different.

2.Type the following string to set the Management Port IP address and other settings, then press Enter.

30