Chapter 4: Management with WebPAM PROe
•Data sequence in order – Enables placement of data in sequence order.
•
•
To make changes to the Data Port settings:
1.Click the Subsystem 
icon in Tree View.
2.Click the Administrative Tools 
icon.
3.Click on the iSCSI Management 
icon.
4.Click the iSCSI Node 1 link in Management View.
5.Type an alias in the Alias field.
Maximum of 32 characters. Use letters, numbers, space between words, and underscore. An alias is optional.
6.Enter the values in the fields as required
7.Check the boxes to enable features as required.
8.Click the Submit button.
Notes
Header Digest and Data Digest work best with initiators equipped with a TCP Offload Engine (TOE). Refer to your iSCSI HBA user manual for more information.
For iSCSI network settings on the Data Ports, click on the Network Management icon, then click on the iSCSI Network tab
iSCSI Ports
The iSCSI
1.Click the Subsystem 
icon in Tree View.
2.Click the Administrative Tools 
icon.
3.Click on the iSCSI Management 
icon.
4.Click the Portal tab in Management View.
Information (in GUI order):
•Controller ID – (1).
•Port ID – (1 or 2).
•Max Receive Data Segment Length – (512 KB is the default).
•Number of Active Sessions – (Number of sessions logged into this port).
89