Promise Technology S150 Existing Windows NT4.0 Installation, Removing Driver from Windows NT4.0

Page 45

Chapter 4: Installing Software Drivers

Existing Windows NT4.0 Installation

The following section details the installation of FastTrak TX4 drivers on a system that has Windows NT4.0 already installed and running.

NOTE: Do not attach the boot drive or any other hard drive to the FastTrak TX4 controller card before completing this step.

1.From the Start menu, choose Settings.

2.From the Settings menu, choose Control Panel.

3.Double-click the SCSI Adapters icon. The SCSI Adapters dialog box appears.

4.Choose Drivers then click Add.

5.In the Install Drivers dialog box, click Have Disk…

6.When Install From Disk appears, insert the FastTrak TX4 driver diskette in drive A:.

7.Type A:\NT4 in the text box window then click OK.

8.When the Install Driver dialog box appears, select WinNT Promise FastTrak TX4000/S150 TX Series Controller then click OK.

9.When the Select SCSI Adapter Option dialog box appears, click Install.

10.After a successful installation, the SCSI Adapter Setup box will show that the “WinNT Promise FastTrak TX4000/S150 TX Series Controller” has been installed.

11.Power off your system.

12.If you plan to move the boot drive to the FastTrak card, do it now. Otherwise reboot.

Removing Driver from Windows NT4.0

1.From Start, choose Setup then choose Control Panel.

2.In Control Panel, choose SCSI Adapter then choose Drivers.

3.Click the Remove button.

4.After successful removal, the SCSI Adapter Setup box will show that the “WinNT Promise FastTrak TX4000/S150 TX Series Controller” has been removed.

41

Image 45
Contents Fasttrak S150 TX4 Copyright TrademarksImportant Data Protection Information Contents Page FastTrak S150 TX4 IntroductionPromise Array Management Utility PAM Features Benefits Key Features and BenefitsCompatibility Unpacking Your FastTrak Card InstallationInsert the FastTrak card into an open PCI slot Installing the FastTrak CardInstalling the Hard Drives FastTrak S150 TX4 card Creating Your Disk Array Creating a Performance Array Creating a Security Array with New Drives Creating a Security Array with an Existing Data Drive Seagate S380023AS Creating a Security Array with Quick Initialization Viewing FastTrak S150 TX4 Bios Screen Using FastBuild Configuration UtilityUsing the Main Menu Navigating the FastBuild Setup MenuCreating Arrays Automatically Optimize Array forPerformance Security and Performance SecurityCreating Multiple Arrays Using a Hot Spare DriveViewing Drive Assignments Manually Creating an Array Selecting Stripe Block Selecting Array TypeAssigning Drives to Array Gigabyte BoundaryCreating a Striped Array Creating a Mirrored Array Using New DrivesAdding Fault Tolerance to an Existing Drive Drive Model Capacity MB Creating a Hot Spare Drive for Mirrored Arrays How FastTrak S150 TX4 Orders ArraysHow FastTrak S150 TX4 Saves Array Information Deleting an Array Array Stripe 160048 Rebuilding a Mirrored Array 80024 Page Procedure Number Installing Software DriversNew Windows XP Installation Confirming Windows XP Driver Installation Existing Windows XP InstallationNew Windows 2000 Installation Confirming Windows 2000 Driver Installation Existing Windows 2000 InstallationNew Windows ME Installation Confirming Windows ME Driver Installation Existing Windows ME InstallationNew Windows NT4.0 Installation Removing Driver from Windows NT4.0 Existing Windows NT4.0 InstallationNew Windows 98 Installation Confirming Windows 98 Driver Installation Existing Windows 98 InstallationPage FastBuild Auto Menu Setup About Adapter BiosDisk Array Concepts About FastTrak S150 TX4Disk Array Terms RAID Level Performance Fault Capacity No. Tolerance DrivesDisk Array Description Disk Array MemberStriping RAID About RAID LevelsData Mirror Disk Drives Mirroring RAIDStriping / Mirroring RAID 0+1 Failed Array Event Drives Status Why? About Dual Data RedundancyMotherboard Issues Troubleshooting & TipsConfiguring PCI IRQ resources Intermittent data problemsUsing an Onboard IDE Card with FastTrak S150 TX4 System Cmos IssuesCritical Array Status Error Reported during Boot Drive-Related ErrorsDrive cannot be formed into an array System Cmos displays C or D drive failure during StartupUnable to Partition or Format Array Cannot Rebuild Mirrored RAID 1 Array Promise Windows driver does not appear in Device Manager Operating System-Related IssuesTroubleshooting & Tips Optimize Array for Performance Performance TipsChange Setting of PCI Bus Utilization Page Pre-Installation Appendix a Frequently Asked QuestionsDrive Issues RAID 0 StripeRAID 1 Mirror Appendix a FAQs Post-Installation Installation IssuesAppendix B Technical Support Technical Support ServicesUSA Tech Support Center European Tech SupportChina Office Pacific Rim Sales OfficeDisclaimer of other warranties Limited WarrantyYour Responsibilities Returning Product for Repair

S150 specifications

Promise Technology S150 is an advanced storage solution designed to meet the data management needs of modern businesses. This high-performance storage appliance is characterized by its scalability, reliability, and user-friendly management interface, making it an optimal choice for organizations looking to optimize their data storage strategies.

One of the standout features of the S150 is its support for multiple RAID levels, including RAID 0, 1, 5, 6, and 10. This ensures that businesses can tailor their storage configurations based on their specific redundancy and performance requirements. The S150's software-defined storage capabilities provide flexibility in allocating resources, enabling organizations to manage their data efficiently and improve overall performance.

In terms of connectivity, the Promise S150 offers a range of options, including high-speed 10GbE and Fibre Channel interfaces. These technologies ensure that data transfer rates remain high, minimizing latency and allowing seamless access to applications and data. Additionally, the device supports hot-swappable drives, allowing users to replace or upgrade components without downtime, further enhancing productivity.

The management of the S150 is simplified through the Promise Management software, which provides intuitive controls and monitoring capabilities. Users can easily configure storage settings, monitor performance metrics, and maintain data integrity using the built-in tools. The software's graphical user interface makes it straightforward even for those without extensive IT experience, reducing the administrative burden on staff.

Another notable characteristic of the S150 is its robust security features. It provides options for data encryption both at rest and in transit, ensuring that sensitive information is protected against unauthorized access. Advanced user authentication protocols further enhance security, making it suitable for enterprises dealing with confidential data.

The S150 is also designed with energy efficiency in mind. Its intelligent cooling system and power management features help to reduce overall energy consumption, which is crucial for organizations looking to lower operational costs and reduce their environmental impact.

In summary, Promise Technology S150 stands out in the storage market due to its combination of scalability, versatility, and robust management features. With its support for multiple RAID configurations, high-speed connectivity options, intuitive management software, and strong security protocols, the S150 is well-equipped to support the data demands of businesses today and into the future. It represents a reliable and efficient solution for those looking to enhance their data storage infrastructure.