Chapter 3
System Disassembly
This chapter provides
Disassembly Tools
In performing the disassembly process, you will need the following tools:
•
•Philips screwdriver
•Flat screwdriver
NOTES • To reinstall the system components and assemble the unit, perform the disassembly procedures in reverse.
•The screws for the different components vary in size. During the disassembly process, group the screws with their corresponding components to avoid mismatches when putting back the components.
Pre-disassembly Procedure
Before proceeding with the disassembly procedure, perform the steps listed below:
1.Make sure that the optical disc drive and the card reader slot are empty.
2.Turn off the power to the computer and all peripherals.
3.Unplug the power cord from the computer.
4.Unplug the network cable and all connected peripheral devices from the computer.
5.Place the computer on a flat, steady surface with the rear cover facing upward.
Packard Bell oneTwo M3600 AIO Computer Service Guide | 25 |