Removing the Mainboard
1.Remove the LCD assembly by following the procedure described on the page 30.
2.Remove the ODD by following the procedure described on the page 33.
3.Remove the HDD by following the procedure described on page 35.
4.Remove the system fan by following the procedure described on page 36.
5.Remove the heat sink by following the procedure described on page 38.
6.Remove the memory modules by following the procedure described on page 39.
7.Remove the webcam cable by following the procedure described on page 39.
8.Remove the power button/LED assembly by following the procedure described on page 40.
9.Remove the speakers by following the procedure described on page 41.
10.Remove the screws securing the mainboard.
Quantity | Color | Torque | Part Number |
|
|
|
|
5 | Chrome | 4.5 +/- 0.3 kgf.cm | 86.7A554.6R0 |
|
|
|
|
11.Remove the mainboard.
•A circuit board that is >10 cm2 has been highlighted with a yellow rectangle as shown in the above image. Follow local regulations for disposing this type of circuit board.
•The RTC battery has been highlighted with a yellow circle in the above image. Detach the RTC battery and follow local regulations for disposing it.
42 | Packard Bell oneTwo M3600 AIO Computer Service Guide |