Emotiva RPA-1 manual Speaker Placement Tips, Tips Before Beginning

Page 19

Speaker Placement Tips

Tips Before Beginning

Read this section thoroughly. There are a number of ways in which it may seem aesthetically pleasing to place speakers in a room that will ultimately result in a sound quality compromise. The placement of speakers is equally as important as the room itself. While there may be very little you can do about the room where your home theater is installed, you can choose placement of speakers within that room to maximize the sound quality of the system. Ultimately, this will give a much better result when you are enjoying your home theater and your new Emotiva RSP-1.

Overall, the best placement for front speakers is where the sound is directed at ear level. This means that the speakers themselves can be in positions lower (like small floor standing speakers) or higher (like in-wall or in-ceiling speakers) as long as the sound is “pointed” toward the listeners and preferably around ear level. Ideally you will place the speakers so they create an imaginary triangle with the listening position. This is known as the “Stereo Triangle” among audiophiles. A little toe-in of the front speakers sometimes helps the perceived distance between the speakers as more intimate and reinforces a phantom center image. If you are doing a “2.1” system, a subwoofer can also be a little challenging to install depending on the room. In multiple subwoofer installations, the positioning of the woofers to the listener as well as to each other is critical because there can be problems with cancellation if optimum placement is not observed.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents USER’S Guide Table of Contents RPA-1 Technical Specifications Trademark Disclosure Safety Precautions Page Antenna Grounding Outside the House NEC National Electrical Code StandardsThank You for your RPA-1 Purchase Inventory Unpacking the RPA-1Recording the Serial Number RPA-1 Front Panel Layout Emotiva RPA-1 Reference Power AmplifierRCA Audio Inputs RPA-1 Rear Panel LayoutAC Power Considerations Installation and ConnectionsPhysical Placement Output Connection Considerations Input Connection ConsiderationsConnection Tips for Superior Sound Connection of a Preamp Level Device using RCA Inputs Connection DiagramsConnecting a Preamp Connection of a Preamp Level Device using XLR InputsConnection of a Stereo Speakers Connecting SpeakersBiamped Connections Low Pass and High Pass 12V Trigger Connections Series Series and Parallel Speaker ConnectionsParallel Technical Note about Multiple Speaker Connections Tips Before Beginning Speaker Placement TipsSubwoofer Location for 2.1 Systems Front SpeakersBass music No Sound from one or more speakers connected to the RPA-1 Troubleshooting GuideHum Noises in the Speakers Turn-on and turn-off thumpsRED light on the front panel is illuminated solid red Problems with the whole Audio SystemOther Probable Causes of Noise RED light on the front panel blinks from blue to redRaw Weight Shipping Weight Dimensions RPA-1 Technical SpecificationsEmotiva Disclosure Trademark DisclosureService Assistance for the RPA-1 Limited WarrantyEmotiva Franklin, TN

RPA-1 specifications

The Emotiva RPA-1 is a high-performance power amplifier designed for audio enthusiasts who demand exceptional sound quality and reliability. This amplifier is a part of Emotiva’s RPA series, known for their outstanding engineering and sonic performance. The RPA-1 delivers impressive power output, with the ability to drive demanding speakers effortlessly, making it ideal for both music and home theater applications.

One of the main features of the RPA-1 is its robust power output. It provides 200 watts per channel into 8 ohms and an even more powerful 400 watts per channel into 4 ohms, ensuring that it can handle dynamic music passages and movie soundtracks with ease. This amplifier employs Class AB amplification technology, which combines the benefits of both Class A and Class B amplifiers, resulting in low distortion, high efficiency, and a very clean sound.

The RPA-1 is equipped with a high-quality, custom-designed power supply, which features a large toroidal transformer and multiple large filter capacitors. This design ensures that there is ample power for transient peaks in the audio signal, leading to improved dynamics and headroom. The amplifier also includes a sophisticated protection circuit to prevent damage from short circuits or overheating, ensuring longevity and reliability.

Another characteristic of the Emotiva RPA-1 is its exceptional build quality. The chassis is constructed from heavy-duty steel, providing a solid and stable foundation that minimizes resonances. The sleek, modern design features a brushed aluminum front panel with easy-to-read indicators, creating an aesthetically pleasing addition to any audio setup.

In terms of connectivity, the RPA-1 features multiple RCA inputs for connecting to various audio sources, as well as binding post outputs for speaker connections. This versatility allows users to integrate the amplifier into a wide range of systems, from stereo setups to multi-channel home theaters.

Overall, the Emotiva RPA-1 is a powerful, reliable, and versatile amplifier that delivers exceptional audio performance. Its combination of high power output, robust build quality, and advanced technologies makes it an excellent choice for audiophiles and home theater enthusiasts alike. Whether you are listening to music or watching movies, the RPA-1 is sure to provide an immersive and satisfying audio experience.
Top Page Image Contents