Emotiva RPA-1 manual Safety Precautions

Page 4

Safety Precautions

Read this User’s Guide thoroughly before attempting to install and configure the Emotiva RPA-1 Amplifier. All the safety and operation instructions should be read before any operation of the component(s) begin. After successful installation and configuration of the Emotiva RPA-1 Reference Power Amplifier, be sure to retain this manual in a safe place for any future reference needs.

All warnings on the Emotiva RPA-1 Reference Power Amplifier and in these operating instructions should be followed. Safety is a key component to a long lasting and trouble free installation. The vast majority of the subsequent safety precautions involve simple common sense. If you are not comfortable with the installation of audio/video entertainment equipment, it will be to your benefit to seek the services of a qualified installation professional.

The Emotiva RPA-1 Amplifier should NEVER be used near water such as a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

The Emotiva RPA-1 Amplifier should be situated so that its location or installation position does not interfere with proper ventilation.

The Emotiva RPA-1 Amplifier should not be situated on a bed, sofa, rug, or similar surface that may block any ventilation openings; or placed in a built-in installation such as a bookcase, cabinet, or closed equipment rack that may impede the flow of air through ventilation openings. If installed in a closed equipment rack for custom installations, be sure to add forced air ventilation so that it has adequate air circulation.

The Emotiva RPA-1 Amplifier should be situated away from heat sources such as radiators, or any other devices which produce heat.

The Emotiva RPA-1 Amplifier should be connected to a power supply only of the type described in this User’s Guide and what is labeled on the RPA-1 component. Power supply cords should be routed so that they are not in high foot traffic areas or pinched by items placed upon or against them, paying particular attention to cords at the wall plugs, convenience receptacles, and the point where they connect into the RPA-1 Amplifier. The power cord of the RPA-1 Amplifier should be unplugged from the outlet when unused for a long period of time.

When it’s time for cleaning the Emotiva RPA-1 Amplifier, it should be cleaned only as recommended in this User’s Guide. Never spray liquids directly into the component’s vent openings. Care should be taken so that small objects do not fall into the inside of the RPA-1 Amplifier.

The following situations require your Emotiva RPA-1 Amplifier is serviced only by qualified service personnel:

1.The power-supply cord or the plug has been damaged; or

2.Objects have fallen, or liquid has spilled into the component; or

3.The RPA-1 has been exposed to rain; or

4.The RPA-1 does not appear to operate normally or exhibits a marked change in performance; or

5.The RPA-1 has been dropped, or its enclosure or chassis is damaged.

The user should not attempt to service the RPA-1 Amplifier beyond the means described in this User’s Guide. All other servicing should be referred to qualified service personnel.

Page 4

Image 4
Contents USER’S Guide Table of Contents RPA-1 Technical Specifications Trademark Disclosure Safety Precautions Page NEC National Electrical Code Standards Antenna Grounding Outside the HouseThank You for your RPA-1 Purchase Inventory Unpacking the RPA-1Recording the Serial Number Emotiva RPA-1 Reference Power Amplifier RPA-1 Front Panel LayoutRPA-1 Rear Panel Layout RCA Audio InputsAC Power Considerations Installation and ConnectionsPhysical Placement Output Connection Considerations Input Connection ConsiderationsConnection Tips for Superior Sound Connection Diagrams Connecting a PreampConnection of a Preamp Level Device using XLR Inputs Connection of a Preamp Level Device using RCA InputsConnecting Speakers Connection of a Stereo SpeakersBiamped Connections Low Pass and High Pass 12V Trigger Connections Series Series and Parallel Speaker ConnectionsParallel Technical Note about Multiple Speaker Connections Speaker Placement Tips Tips Before BeginningFront Speakers Subwoofer Location for 2.1 SystemsBass music Troubleshooting Guide No Sound from one or more speakers connected to the RPA-1Turn-on and turn-off thumps Hum Noises in the SpeakersProblems with the whole Audio System Other Probable Causes of NoiseRED light on the front panel blinks from blue to red RED light on the front panel is illuminated solid redRPA-1 Technical Specifications Raw Weight Shipping Weight DimensionsTrademark Disclosure Emotiva DisclosureService Assistance for the RPA-1 Limited WarrantyEmotiva Franklin, TN

RPA-1 specifications

The Emotiva RPA-1 is a high-performance power amplifier designed for audio enthusiasts who demand exceptional sound quality and reliability. This amplifier is a part of Emotiva’s RPA series, known for their outstanding engineering and sonic performance. The RPA-1 delivers impressive power output, with the ability to drive demanding speakers effortlessly, making it ideal for both music and home theater applications.

One of the main features of the RPA-1 is its robust power output. It provides 200 watts per channel into 8 ohms and an even more powerful 400 watts per channel into 4 ohms, ensuring that it can handle dynamic music passages and movie soundtracks with ease. This amplifier employs Class AB amplification technology, which combines the benefits of both Class A and Class B amplifiers, resulting in low distortion, high efficiency, and a very clean sound.

The RPA-1 is equipped with a high-quality, custom-designed power supply, which features a large toroidal transformer and multiple large filter capacitors. This design ensures that there is ample power for transient peaks in the audio signal, leading to improved dynamics and headroom. The amplifier also includes a sophisticated protection circuit to prevent damage from short circuits or overheating, ensuring longevity and reliability.

Another characteristic of the Emotiva RPA-1 is its exceptional build quality. The chassis is constructed from heavy-duty steel, providing a solid and stable foundation that minimizes resonances. The sleek, modern design features a brushed aluminum front panel with easy-to-read indicators, creating an aesthetically pleasing addition to any audio setup.

In terms of connectivity, the RPA-1 features multiple RCA inputs for connecting to various audio sources, as well as binding post outputs for speaker connections. This versatility allows users to integrate the amplifier into a wide range of systems, from stereo setups to multi-channel home theaters.

Overall, the Emotiva RPA-1 is a powerful, reliable, and versatile amplifier that delivers exceptional audio performance. Its combination of high power output, robust build quality, and advanced technologies makes it an excellent choice for audiophiles and home theater enthusiasts alike. Whether you are listening to music or watching movies, the RPA-1 is sure to provide an immersive and satisfying audio experience.