Emotiva manual RPA-1 Technical Specifications, Raw Weight Shipping Weight Dimensions

Page 25

RPA-1 Technical Specifications

Rated Power Output:

(Per Channel)

Frequency Response:

20-20Khz:

10-100Khz:

Total Harmonic Distortion (THD):

Signal-to-Noise Ratio:

DC Offset:

Crosstalk:

Damping Factor:

Input Sensitivity Range (Gain):

Input Impedance (XLR Input): Input Impedance (RCA Input):

External Trigger Input:

Clearance for ventilation (Back): Electrical Power Requirement: Electrical Power Consumption:

Raw Weight:

Shipping Weight:

Dimensions:

(Both Channels Driven @ 1Khz, 120VAC/ 60HZ supply, THD noted) 200 Watts into 8 Ohms (0.04%THD)

300 Watts into 4 Ohms (0.04%THD)

+/-0.1dB +/-1.0dB

(1Hz to 80kHz measurement bandwidth) <0.015%

>100dB, Unweighted (Full Output Reference) <1mV

>75dB

Approximately 200 into 8 Ohms

29dB

47K Ohm

47K Ohm

5-12 VDC

Minimum 2” / 50 mm

800 watts @ 115VAC when driven into 8 Ohms

4 Watts (Standby) and 46 Watts (Idle)

51 lbs / 23.18 kg

59.5 lbs / 27.0 kg

18.4375”W x 6” H x 16..4375” D 469mm W x 153mm H x 418mm D

Page 25

Image 25
Contents USER’S Guide Table of Contents RPA-1 Technical Specifications Trademark Disclosure Safety Precautions Page Antenna Grounding Outside the House NEC National Electrical Code StandardsThank You for your RPA-1 Purchase Inventory Unpacking the RPA-1Recording the Serial Number RPA-1 Front Panel Layout Emotiva RPA-1 Reference Power AmplifierRCA Audio Inputs RPA-1 Rear Panel LayoutAC Power Considerations Installation and ConnectionsPhysical Placement Output Connection Considerations Input Connection ConsiderationsConnection Tips for Superior Sound Connecting a Preamp Connection DiagramsConnection of a Preamp Level Device using XLR Inputs Connection of a Preamp Level Device using RCA InputsConnection of a Stereo Speakers Connecting SpeakersBiamped Connections Low Pass and High Pass 12V Trigger Connections Series Series and Parallel Speaker ConnectionsParallel Technical Note about Multiple Speaker Connections Tips Before Beginning Speaker Placement TipsSubwoofer Location for 2.1 Systems Front SpeakersBass music No Sound from one or more speakers connected to the RPA-1 Troubleshooting GuideHum Noises in the Speakers Turn-on and turn-off thumpsOther Probable Causes of Noise Problems with the whole Audio SystemRED light on the front panel blinks from blue to red RED light on the front panel is illuminated solid redRaw Weight Shipping Weight Dimensions RPA-1 Technical SpecificationsEmotiva Disclosure Trademark DisclosureService Assistance for the RPA-1 Limited WarrantyEmotiva Franklin, TN

RPA-1 specifications

The Emotiva RPA-1 is a high-performance power amplifier designed for audio enthusiasts who demand exceptional sound quality and reliability. This amplifier is a part of Emotiva’s RPA series, known for their outstanding engineering and sonic performance. The RPA-1 delivers impressive power output, with the ability to drive demanding speakers effortlessly, making it ideal for both music and home theater applications.

One of the main features of the RPA-1 is its robust power output. It provides 200 watts per channel into 8 ohms and an even more powerful 400 watts per channel into 4 ohms, ensuring that it can handle dynamic music passages and movie soundtracks with ease. This amplifier employs Class AB amplification technology, which combines the benefits of both Class A and Class B amplifiers, resulting in low distortion, high efficiency, and a very clean sound.

The RPA-1 is equipped with a high-quality, custom-designed power supply, which features a large toroidal transformer and multiple large filter capacitors. This design ensures that there is ample power for transient peaks in the audio signal, leading to improved dynamics and headroom. The amplifier also includes a sophisticated protection circuit to prevent damage from short circuits or overheating, ensuring longevity and reliability.

Another characteristic of the Emotiva RPA-1 is its exceptional build quality. The chassis is constructed from heavy-duty steel, providing a solid and stable foundation that minimizes resonances. The sleek, modern design features a brushed aluminum front panel with easy-to-read indicators, creating an aesthetically pleasing addition to any audio setup.

In terms of connectivity, the RPA-1 features multiple RCA inputs for connecting to various audio sources, as well as binding post outputs for speaker connections. This versatility allows users to integrate the amplifier into a wide range of systems, from stereo setups to multi-channel home theaters.

Overall, the Emotiva RPA-1 is a powerful, reliable, and versatile amplifier that delivers exceptional audio performance. Its combination of high power output, robust build quality, and advanced technologies makes it an excellent choice for audiophiles and home theater enthusiasts alike. Whether you are listening to music or watching movies, the RPA-1 is sure to provide an immersive and satisfying audio experience.