2To expand your configuration with multiple SANbloc S50 enclosures, continue to connect the EXP port of the previous enclosure to the HOST port of the next enclosure.
| SANbloc S50 Enclosures | |
| HOST | EXP |
| FAULT ! |
|
| SEP MASTER |
|
Snap Server |
|
|
| HOST | EXP |
| FAULT ! |
|
| SEP MASTER |
|
SAS Port | HOST | EXP |
FAULT ! |
| |
SEP MASTER |
| |
| HOST Port | EXP Port |
You can connect up to seven SANbloc S50 enclosures to a single Snap Server.
3Continue with “Powering On”.
Powering On
Before you begin, ensure that your Snap Server is powered off.
1Use the included power cords to connect each APC unit on each SANbloc S50 to an AC power source. Adaptec recommends that you use an uninterruptible power supply (UPS) to protect your enclosure, and that each APC unit be connected to a different UPS on a different building circuit.
2Power on all SANbloc S50 enclosures.
9 | SANBloc S50 Quick Install Guide |