Installation Cautions and Notes

•Liquid has penetrated the server.

•The server has been exposed to moisture.

•The server continues to operate in an unexpected manner even after solutions suggested in the Administration Guide have been followed.

Installation Cautions and Notes

Caution To prevent personal injury and equipment damage, have someone assist you during installation. Ensure the mounting hardware and tools are easily accessible. If necessary, reduce the weight of the storage subsystem by removing the drive carriers and APC modules.

Note Remove all of the components from the packaging and place them on an antistatic surface until you are ready to use them. If you are using new disk drives, allow them to acclimate to room temperature before you install them in the enclosure and power on the system. Before beginning the installation, inspect the components for shipping damage.

Note Ensure that your equipment rack is placed in a dust-free, well ventilated area close to a UPS. Leave enough room behind the rack for servicing and to allow for sufficient airflow.

Note For equipment racks with single or multiple storage subsystems installed, the TMRA (manufacturers maximum recommended ambient temperature) is 40 °C.

Note Elevated Operating Ambient Temperature—When installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than the room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer's maximum recommended ambient (TMRA).

Note Mechanical Loading—Prevent instability by installing heavier items into the bottom of the equipment rack. Mounting of the equipment in a rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

SANBloc S50 Quick Install Guide