Adaptec S50 quick start Installing the Disk Drives, Unsupported Disk Drive Combinations

Page 8

Unsupported Disk Drive Combinations

Do not include SAS and SATA disk

drives in the same column.

Do not place a column of SATA disk drives between two columns of SAS disk drives.

Installing the Disk Drives

1Select an open drive slot.

2Hold the disk drive with the LEDs on the left and the lever fully open.

3Slide the disk drive into the drive slot until the lever starts to close.

SANBloc S50 Quick Install Guide

6

Image 8
Contents Using the SANbloc S50 Jbod Enclosure with Snap Servers Copyright SANBloc S50 Quick Install Guide Enclosure Features and Accessories Installing Your Adaptec Enclosure into a Rack Secure both rackmount ears to the front vertical supports Before You Begin Installing Additional Disk DrivesRecommended Disk Drive Configurations Installing the Disk Drives Unsupported Disk Drive CombinationsConnecting to Your Snap Server Connecting One SANbloc S50 EnclosureConnecting Additional SANbloc S50 Enclosures Powering On Verifying that an Enclosure is Online Registering Your SANbloc S50Service and Technical Support Getting HelpAdaptec, Inc. Worldwide Limited Warranty SANbloc S50 Expansion Array 3 Years parts and laborSANBloc S50 Quick Install Guide FCC Notification Safety PrecautionsAuthorized Service SANBloc S50 Quick Install Guide Installation Cautions and Notes Page Milpitas Blvd. Milpitas, CA 95035 USA