FieldServer NCA2-NFS2-3030, FS-8700-130 instruction manual Hardware Connection Tips / Hints

Page 5

FS-8700-130 Notifier NCA2/NFS-3030 Manual	Page 5 of 22

3.1Hardware Connection Tips / Hints

•The FieldServer should preferably be connected to the TB5 Printer port. It is theoretically possible to connect to the TB5 CRT port, but this has not been fully tested.

•The Panel’s port must be enabled and set to 80 Columns Not Supervised.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: support@fieldserver.com

Image 5

Contents Effective for all systems manufactured after January Driver Manual FS-8700-130 Notifier NCA2-NFS2-3030Table of Contents Max Nodes Supported Supplied by FieldServer Technologies for this driverFS-8700-130 Notifier NCA2/NFS-3030 Manual CRX CTX TB5 CRTTB5 Printer PRX PTXHardware Connection Tips / Hints Active Events Panel Status Memory MappingMemory Type NodeTrouble Example Data Arrays/DescriptorsClient Side Node Descriptors Client Side Connection DescriptionsYes ,No Driver Related Map Descriptor ParametersMap Descriptor Example Standard example FS-8700-130 Notifier NCA2/NFS-3030 Manual Alarm Security Cleared Security Fire Alarm ClearedAlarm Life Life Critical Cleared Alarm Critical Alarm Medical Cleared MedicalAppendix A.2. System Trouble Messages Remote Display 21 Trouble Analog Output 1 Trouble Remote Display 8 no Answer Appendix A.4. FieldServer Synchronization Appendix A.3. Node StatusAppendix A.5. Driver Limitations and Exclusions Appendix B.2. Networking Tips Appendix B.1. Connection Tips & HintsOFF Error Description ActionFYI