| Page 8 of 24 |
4.2.Client Side Connection Descriptions
| Section Title |
|
|
|
| Connections |
|
|
|
| Column Title | Function |
| Legal Values |
| Port | Specify which port the device | is | |
|
| connected to the FieldServer |
|
|
| Protocol | Specify protocol used |
| FCI_7100, FCI_7100_series, |
|
| FCI7100 | ||
|
|
|
| |
| Baud* | Specify baud rate |
| 1200 – Vendor Limitation |
| Parity* | Specify parity |
| None – Vendor Limitation. |
| Data_Bits* | Specify data bits |
| 8 – Vendor Limitation |
| Stop_Bits* | Specify stop bits |
| 1 – Vendor Limitation |
| Handshaking* | The 7100 series panels do not support hand | shaking. | |
| Poll _Delay* | This commonly used parameter has no meaning for this driver. | ||
Example
//Client Side Connections
Connections
Port, | Protocol, | Baud, | Parity |
P8, | FCI_7100, | 1200 | None |
1Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)