Maxtor STM3250820AS, STM3160815AS, STM3160215AS, STM3250310AS manual Environmental specifications

2.9Environmental specifications

2.9.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters).

Operating:	0° to 60°C (32° to 140°F)
Nonoperating:	–40° to 70°C (–40° to 158°F)

2.9.2Temperature gradient

Operating:	20°C per hour (68°F per hour max), without condensation
Nonoperating:	30°C per hour (86°F per hour max)

2.9.3Humidity

2.9.3.1Relative humidity

Operating:	5% to 90% noncondensing (30% per hour max)
Nonoperating:	5% to 95% noncondensing (30% per hour max)

2.9.3.2Wet bulb temperature

Operating:	All models	37.7°C (99.9°F max)
Nonoperating:	STM3500630AS, STM3320620AS, STM3320820AS,	37.7°C (99.9°F max)
	STM3250824AS, STM3250820AS, STM3250310AS
	STM3250824AS, STM3160815AS, STM3160215AS,	40°C (104°F max)
	STM380815AS, STM380215AS and STM340215AS

2.9.4Altitude

Operating:	–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)
Nonoperating:	–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

2.9.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1Operating shock

STM3500630AS, STM3320620AS, STM3320820AS, STM3250820AS, STM3160815AS,

STM3160215AS, STM380815AS, STM380215AS and STM340215AS

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 68 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

DiamondMax 21 Serial ATA Product Manual, Rev. C 23