Maxtor 54098U8, 51024U2, 52049U4, 51536U3, 53073U6 specifications A.R.T. CommandSet, Key Register

Page 54

INTERFACE COMMANDS

S.M.A.R.T. CommandSet

Execute S.M.A.R.T.

The Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.) command has been implemented to improve the data integrity and data availability of hard disk drives. In some cases, a S.M.A.R.T. capable device will predict an impending failure with sufficient time to allow users to backup their data and replace the drive before data loss or loss of service.

The S.M.A.R.T. sub-commands (listed below) comprise the ATA S.M.A.R.T. feature set that provide access to S.M.A.R.T. attribute values, attribute thresholds and other logging and reporting information.

Prior to writing a S.M.A.R.T. command to the device’s command register, key values must be written by the host into the device’s Cylinder Low and Cylinder High registers, or the command will be aborted. For any S.M.A.R.T. sub-command, if a device register is not specified as being written with a value by the host, then the value in that register is undefined and will be ignored by the device. The key values are:

Key

Register

4Fh

Cylinder Low (1F4h)

C2h

Cylinder High (1F5h)

The S.M.A.R.T. sub-commands use a single command code (B0h) and are differentiated from one another by the value placed in the Features register. In order to issue a command, the host must write the sub- command-specific code to the device’s Features register before writing the command code to the command register. The sub-commands and their respective codes are:

D0h

S.M.A.R.T. Read Attribute Value

 

This feature returns 512 bytes of attribute information to the host.

D1h

S.M.A.R.T. Read Attribute Thresholds

 

This feature returns 512 bytes of warranty failure thresholds to the host.

D2h

Enable/Disable Autosave

 

To enable this feature, set the sector count register to F1h (enable) or 0 (disable). Attribute values

 

are automatically saved to non-volatile storage on the device after five minutes of idle time and

 

before entering idle, sleep or standby modes. This feature is defaulted to “enabled” when

 

S.M.A.R.T. is enabled via the S.M.A.R.T. Enable Operations commands. The autosave feature

 

will not impact host system performance and does not need to be disabled.

D3h

S.M.A.R.T. Save Attribute Value

 

This feature saves the current attribute values to non-volatile storage.

D4h

Perform Off-Line Data Collection

 

Data is collected from random seeks, timed pattern seek times and head margin tests.

D8h

Enable S.M.A.R.T.

D9h

Disable S.M.A.R.T.

DAh

S.M.A.R.T. Return Status

 

This feature allows the host to assess the status of a S.M.A.R.T. capable device by comparing all

 

saved attribute values with their corresponding warranty failure thresholds. If no thresholds are

 

exceeded, the drive is declared to have a positive health status. If any warranty failure threshold is

 

exceeded, the drive is declared to have a negative health status. Executing this sub-command

 

results in all attribute values being saved to non-volatile storage on the device.

DBh

Enable/Disable Automatic Off-Line

 

To enable this feature, set the Sector Count register to F1h or 0 to disable.

7 – 14

Page 53 Page 55
Image 54
Page 53 Page 55
Contents DiamondMax Plus Before You Begin U T I O NContents Product Specifications Handling and InstallationDiamondmax Plus 40 Product Manual Interface Commands AT Interface DescriptionHost Software Interface Service and Support GlossaryFigures ManualOrganization IntroductionMaxtorCorporation AbbreviationsConventions Diamondmax Plus 40 IntroductionDiamondMax Plus 40 Key Features Product DescriptionModel CYL SPT Product FeaturesFunctional / Interface MAX LBA CapacityCacheManagement MajorHDAComponents Jumper Configuration SubsystemConfigurationJumper Location / Configuration CylinderLimitationJumperDescriptionPerformanceSpecifications ProductSpecificationsDriveConfiguration ModelsandCapacitiesPhysicalDimensionsmaximum Product SpecificationsEPA Energy Star Compliance PowerRequirementsPowerModeDefinitions EnvironmentalLimitsReliabilitySpecifications Shock and VibrationParameter Operating NON-OPERATING SafetyRegulatoryCompliance EMC/EMIHandlingandInstallation HardDriveHandlingPrecautionsElectro-StaticDischargeESD Installation UnpackingandInspectionPhysicalInstallation RepackingBefore You Begin Hook upSet up Start upATInterfaceDescription InterfaceConnectorPIN Signal PinDescriptionSummaryPIN Name Signal Name Signal Description Pin Description TableAT Interface Description Timing Parameters Mode PIO TimingTiming Parameters Mode 0 Mode 1 Mode DMATimingMode MIN MAX Ultra DMA TimingSustained Ultra DMA Data In Burst Device Terminating an Ultra DMA Data In Burst Initiating an Ultra DMA Data Out Burst Device Pausing an Ultra DMA Data Out Burst Device Terminating an Ultra DMA Data Out Burst Port Read Write HostSoftwareInterfaceTask File Registers Abrt TK0 AmnfHost Software Interface Contents LBA BitsBusy Drdy DSC DRQ ERR LBA DRV HS3 HS2 HS1 HS0CommandRegister Summary Command Name Command Code Parameters UsedTimer Value TIME-OUT Period SDHControl Diagnostic Registers IENDS0 Reset and Interrupt Handling InterfaceCommands ReadCommands Interface CommandsRead DMA WriteCommands Write Multiple SetFeatureCommands Value DescriptionPowerModeCommands Timer Value TIME-OUT Period InitializationCommands Word Content Description15-8 = PIO data transfer mode Interface Commands Word Content Description Initialize Drive Parameters Seek,FormatandDiagnosticCommands Error Code DescriptionA.R.T. CommandSet Key RegisterNoQuibble Service ServiceandSupportServicePolicy SupportService and Support From DialGlossary Directmemoryaccess CorrectableerrorDirectaccess ErrorcorrectioncodeeccExtrapulse HarderrorHeaddiskassemblyhda FeedbackLatebit PhaselockedlooppllLandingzoneorlzone LatewindowReadgatesignal PhasemarginRandomaccessmemoryram RecoverableerrorUN-CORRECTABLEERROR SofterrorStrobeoffsetsignal Unrecoverableerror

51536U3, 53073U6, 52049U4, 54098U8, 51024U2 specifications

The Maxtor 51024U2, 53073U6, 51536U3, 52049U4, and 54098U8 are part of the celebrated Maxtor family of external hard drives, known for their reliability, performance, and technology innovations. These drives cater to various data storage needs, from casual home use to more demanding business applications.

One of the hallmark features of these Maxtor models is their USB connectivity, ensuring compatibility with a wide range of devices. The USB 2.0 interface facilitates data transfer speeds of up to 480 Mbps, while the newer models, like the 54098U8, may also offer USB 3.0 connectivity, enhancing speeds dramatically for compatible devices. This means quicker backups and more efficient file transfers, making it easier for users to manage their digital assets.

In terms of storage capacity, these models vary considerably, accommodating users with diverse needs. The Maxtor 51024U2 features a compact size suitable for portability, perfect for users who need to carry their data on the go. Conversely, the 53073U6 is designed for larger storage requirements, making it suitable for multimedia professionals who handle large files regularly.

Durability is another prominent aspect, with these drives often featuring robust casing to protect against physical damage. Features such as shock resistance help safeguard data during travel, while advanced cooling technologies prevent overheating during use, thereby prolonging the lifespan of the device.

Data management features are also integrated into these Maxtor drives. Users can benefit from bundled software that facilitates backup scheduling, file encryption, and disk management. This software adds an additional layer of security and control over personal data, ensuring that users can easily access their files while maintaining their privacy.

The Maxtor drives prioritize user-friendliness with plug-and-play functionality, which means users can plug the drive into their computer and start using it almost immediately without needing extensive setup procedures. This ease of use ensures that even those who are not tech-savvy can utilize these devices effectively.

In conclusion, the Maxtor 51024U2, 53073U6, 51536U3, 52049U4, and 54098U8 external hard drives are formidable choices for anyone in need of reliable storage solutions. With their impressive features, robust design, and advanced technology, these drives securely meet the demands of various users, making them a staple in data storage technology.
Top Page Image Contents