Page 10 of 16 |
5.Configuring the FieldServer as a DF1 Server
For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” files on the driver diskette).
This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a DF1 Client.
The configuration file tells the FieldServer about its interfaces, and the routing of data required. In order to enable the FieldServer for DF1 communications, the driver independent FieldServer buffers need to be declared in the “Data Arrays” section, the FieldServer virtual node(s) needs to be declared in the “Server Side Nodes” section, and the data to be provided to the Clients needs to be mapped in the “Server Side Map Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the default.
5.1.Server Side Connection Descriptions
| Section Title |
|
|
|
|
| Connections |
|
|
|
|
| Column Title |
| Function |
| Legal Values |
| Port |
| Specify which port the device is connected |
| |
|
|
| to the FieldServer |
|
|
| Baud* |
| Specify baud rate |
| 300 to 115200; 9600 |
| Parity* |
| Specify parity |
| Even, Odd, None |
| Data_Bits* |
| Specify data bits | 8 | |
| Handshaking*7 |
| Specify hardware handshaking |
| RTS, RTS/CTS, None |
| Protocol |
| Specify protocol used |
| DF1_FD, DF1_HD_MASTER, |
|
|
| DF1_HD_SLAVE | ||
|
|
|
|
| |
|
|
|
|
|
|
Example
//Server Side Connections
Ports, |
|
|
Port, |
| Protocol |
P1, |
| DF1_FD |
6Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
7 Handshaking is not supported, only the enabling of the RTS/CTS lines
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)