| Page 4 of 32 |
3.Hardware Connections
The FieldServer is connected to the Carrier DataPort device as shown below.
Configure the DataPort Device according to manufacturer’s instructions. This driver requires that the DataPort device’s DTPCONFIG table has been configured prior to connection with a FieldServer. In addition, consult the manufacturer’s information on connecting Carrier Device’s to CCN network.
Note: Typical connections are 9600,N,8,1.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com