|
|
|
|
| Page 16 of 32 | |||
|
|
|
|
|
|
|
|
|
| Error Conditions |
|
| Force Conditions |
|
|
|
|
| Conditions | A | B | C | D | E | F | |
| No Force | 0 | 1 | 2 | 3 | 4 | 5 | |
| Fire | 16 | 17 | 18 | 19 | 20 | 21 | |
| Safety | 32 | 33 | 34 | 35 | 36 | 37 | |
| Service Tool | 48 | 49 | 50 | 51 | 52 | 53 | |
| Supervisor | 64 | 65 | 66 | 67 | 68 | 69 | |
| Monitor | 80 | 81 | 82 | 83 | 84 | 85 | |
| 96 | 97 | 98 | 99 | 100 | 101 | ||
| Control | 112 | 113 | 114 | 115 | 116 | 117 | |
| BEST | 128 | 129 | 130 | 131 | 132 | 133 | |
| Temp Override | 144 | 145 | 146 | 147 | 148 | 149 | |
| Loadshed | 160 | 161 | 162 | 163 | 164 | 165 | |
Error Conditions:
Ano error
Bhardware or communications error
C software error
D low alarm limit exceeded (analog point),or point in alarm (discrete point)
E high alarm limit exceeded
F unconfigured point (VVT Gateway only)
Force Conditions:
No Force |
|
Fire | forced by fire alarm equipment |
Safety | forced by internal safety override |
Service Tool | forced by CCN Service Tool |
Supervisor | forced by local Building Supervisor |
Monitor | forced by remote Building Supervisor |
forced by minimum off time requirement | |
Control | forced by System Software Option |
BEST | forced by BEST program |
Temp Override | forced by temperature override |
Loadshed | forced by Loadshed System Software Option |
Appendix A.2. Field / Variable Names
A list of variable names vs. table names vs. equipment types is not provided in this manual. The reasons for this are that they are not all available to us they can be configured in some devices using software provided by the Carrier Corporation.
Consult the points list with the literature provided with each type of equipment from Carrier to obtain variable names. Alternately use the software provided by Carrier to browse the network and determine the table and variable names.
This driver may also be used to obtain a list of variable names for a given table. On the following pages are sample Map Descriptors which may be included in the configuration to help obtain this information. FieldServer recommends that if these Map Descriptors are used to obtain variable name information, they should be removed from the final configuration as they will consume resource and processing time.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com