Before You Begin

Dialogic®

DM/V600A-2E1-PCI

Media Board

Quick Install Card

Part Number 64-0074-02

Dialogic Corporation.

Protecting the Board from Damage

CAUTION: All computer boards are sensitive to electrostatic discharge (“ESD”). Handle all static- sensitive boards and components at a static-safe work

Physical Description

			1.	RJ-48C jacks: Connectors to external
	CH4 CH3 CH2 CH1	8		digital telephone network interface.
	Red	8	2.	General Network Interface Alarm LED
	Yellow		2.	General Network Interface Alarm LED
	Yellow		3.	Power LED
	Green		3.	Power LED
	Green		4.	Reset LED
	Loopback		4.	Reset LED
	7		5.	SW1: Rotary switch to set board
				identification (Linux systems only).
	6		6.	Alarm LEDs: During power-up, indicate
				Power on Self Test (POST) status. During
				operation CH1 and CH2 LEDs indicate
				network alarms for each trunk.
			9	Red—Alarm to indicate loss of signal
			9	Yellow—Alarm to indicate loss of frame
				Yellow—Alarm to indicate loss of frame
	5		10	synchronization at far end of external
			10	network
				network
				Green—Indicates signal present; powered
				up and receiving signal from external E1
	4			sources
3	4			Loopback—Indicates loopback mode is
2				activated
1	1		7.	CT Bus/MVIP Bus Termination Jumpers:
	2			Bus signal is terminated when the
	2			corresponding jumper clip is installed.
				corresponding jumper clip is installed.
		JP2A		Note: Signal must be terminated only on
		JP2A		boards at each end of the CT Bus cable.
		JP2B		boards at each end of the CT Bus cable.
		JP2B		JP2A—CT Bus termination jumper
				JP2A—CT Bus termination jumper
				JP2B—MVIP Bus termination jumper
			8.	P3: CT Bus connector
			9.	ISA Edge Retainer
			10.Signal Processing Daughterboard

area, and observe anti-static precautions at all times.

If you are not familiar with ESD safety precautions, visit http://www.dialogic.com/support/hwinstall to learn more.

Unpacking the Board

Unpack the Dialogic® DM/V600A-2E1-PCI Media Board (“board”) according to the following steps:

1.Prepare a static-safeguarded work area.

2.Carefully remove the board from the shipping carton and anti-static packaging. Handle the board by the edges and avoid touching the board’s components.

3.Lay the board on the static-dissipative work

surface.

Note: Place boards in static-shielding bags when carrying boards from station to station.

CAUTION: Do not remove the board from the anti-static packaging until you are ready to install it. Observe proper anti-static precautions at all times.

Configuring the Hardware

Board Identification

The device driver, part of the system software, assigns board instance numbers in ascending order (beginning with 0) as it detects each board in your system. A board instance number is the identification (ID) number used by the system software to recognize the board.

Note: If you add or remove a board, the system may change the existing board instance numbers, depending upon the PCI bus and slot number where the board is installed or removed.

Windows Systems

Leave SW1 set to the factory default of 0 to let the system automatically assign board instance numbers by PCI bus slot number.

After the hardware and the system software are installed, refer to the Dialogic® Configuration Manager (DCM) utility to retrieve the assigned board instance ID number(s). For more information about board identification, see the DCM online help.

Linux Systems

In a Linux system, you must set SW1 to a unique number for each installed board. Use a non-magnetic screwdriver to turn SW1 to one of 16 board ID settings, 0–9 or A–F.

After the hardware and the system software are installed, refer to the proper configuration files to retrieve the assigned board instance ID number(s). For more information about Linux configuration files, see the Dialogic® System Software documentation.

Installing the Hardware

1.With your computer on the static-safe work area, switch off the power and disconnect all power cords from the electrical outlets.

2.Remove the computer cover.

3.Select an empty PCI expansion bus slot and remove the slot’s retaining screw and access cover plate (if applicable).

4.If you are not installing your board in an ISA form factor PCI slot, remove the ISA edge retainer.

64-0074-02, DM/V600A-2E1-PCI specifications

Eicon Networks' 64-0074-02, also identified as the DM/V600A-2E1-PCI, represents a significant advancement in data communication technology, particularly designed for high-performance networking solutions. This versatile card provides robust functionality that caters to various network demands, making it an essential component in enterprise environments.

One of the standout features of the DM/V600A-2E1-PCI is its dual E1 interface, enabling seamless connection to digital telecommunications networks. With the capability to manage up to 30 voice channels per E1 line, this card is ideal for businesses that require efficient voice and data integration. The card's ability to support both voice and data traffic simultaneously ensures that organizations can optimize their communication infrastructure without compromising performance.

Equipped with a PCI interface, the DM/V600A-2E1-PCI provides easy installation within a range of server configurations. The PCI standard ensures compatibility with a broad spectrum of systems, facilitating straightforward upgrades and integration into existing infrastructure. This compatibility is further enhanced by the card's ability to handle diverse protocols, allowing for flexible deployment in various network settings.

Eicon Networks has incorporated advanced technologies into the DM/V600A-2E1-PCI to ensure high reliability and low latency in data transmission. The card supports error correction mechanisms and includes features such as echo cancellation, enhancing the quality of voice communications. This capability is particularly important for businesses that rely on clear, uninterrupted communication.

The DM/V600A-2E1-PCI is designed with scalability in mind. Its architecture allows for easy expansion, enabling organizations to increase their capacity as needed without overhauling their existing systems. This future-proofing aspect is crucial in today’s rapidly evolving technology landscape, where businesses need to adapt quickly to changing demands.

Additionally, the card comes equipped with comprehensive management and monitoring tools. These features provide network administrators with the ability to track performance metrics, diagnose issues, and facilitate proactive management of network resources. This level of oversight contributes to enhanced service reliability and user satisfaction.

In summary, Eicon Networks' 64-0074-02, DM/V600A-2E1-PCI is a feature-rich, robust solution tailored for modern network communication needs. Its dual E1 capabilities, PCI compatibility, advanced technologies, and management features position it as an invaluable asset for organizations looking to enhance their network infrastructure and optimize their communication workflows.