G-Technology 0G01868 manual Add Second G-SPEED eS Pro Unit, Uninstall Atto Driver & ConfigTool

Port A

uninstall
G SPEED™eS PRO	Using the ATTO RAID Controller

Add Second G-SPEED eS Pro Unit

You can add an additonal G-SPEED eS Pro as either a stand-alone volume, or combine it with another unit to create a very fast 8-drive RAID array.

Add as a stand alone volume:

To add as a stand-alone volume, simply repeat the steps in the previous section, attaching the new unit to Port B. Both G-SPEED eS Pro units will mount on the desktop.

Combine with another G-SPEED eS Pro:

In order to combine two G-SPEED eS Pros, both units will need to be reconfigured, deleting all data on the drives. If you currently have a G-SPEED eS Pro and you wish to add a second unit to increase capacity and performance, be sure to BACK UP

YOUR DATA BEFORE CONTINUING.

Port B

1.Plug the second unit into Port B on the ATTO controller.

2.Power on G-SPEED eS Pro.

3.Now you need to configure the two units. Continue to the section Configure Two RAID Units for instructions.

Uninstall ATTO Driver & ConfigTool

The Uninstall application is located in the Applications/ ATTO ConfigTool/Uninstall folder.

Double-click the application file to launch, and follow the prompts.

p.16