Pitney Bowes K700. K7M0 manual Wireless Connection Optional, Meter Installation

Page 11

Installation Part 2 - Set Up Meter

9 Wireless Connection (Optional)

To set up wireless capability, go to:

www.pb.com/support/LAN

Scroll down to select the link Wireless Setup Instructions.

Once your meter is connected to the internet wirelessly, begin meter installation on Step 10 below.

10 Meter Installation

There are two options for installing the meter.

Option 1. Follow online instructions by signing into www.pbwebconnect.com/mymeter

using you Pitney Bowes user name and password.

Your pb.com user name and password were sent to you by email.

The online instructions will provide animations and other helpful assistance for the installation process.

or

Option 2. Follow printed instructions starting on page 8.

7

Image 11
Contents Install Guide Contents Read This First Page Two power outlets Preparing for Installation3Connect the Communication Device to your Internet source Locate the Communication Device and Network Cable5Check LED 4Apply power to Communication DeviceConnect the meter to a power outlet Installation Part 1 Set Up Communication Device To enter special settings Special Network SettingsMeter Installation Wireless Connection OptionalInstall scale Install Ink Cartridge Press Enter. Please wait about 2 minutes Create a Test Print Prepaid Account Congratulations! Your meter is operational Updating Your SoftwarePage If You Need Assistance Contact ListPage Phone Connect Phone Cord3Connect Power Install scaleInstall Ink Cartridge Connect Power4Install Ink Cartridge Create a Test Print 6Connect to Pitney Bowes Data Center 5Create a Test PrintPrepaid Account Updating Your Software No Dial Tone TroubleshootingContacts Page AW31214REVF