Pitney Bowes K700. K7M0 manual Install Ink Cartridge

Page 13

Installation Part 2 - Set Up Meter

12 Install Ink Cartridge

Add ink cartridge.

Continue-Press Enter

A 1. Press the Enter key on the control panel.

2.Lift the cover.

NOTE: If the carriage is not visible close the cover and press Enter.

3.Press unlock symbol to open cartridge cover.

4.Remove and discard the yellow insert.

9

Image 13

Contents Install Guide Contents Read This First Page Two power outlets Preparing for Installation3Connect the Communication Device to your Internet source Locate the Communication Device and Network Cable5Check LED 4Apply power to Communication DeviceConnect the meter to a power outlet Installation Part 1 Set Up Communication Device To enter special settings Special Network SettingsMeter Installation Wireless Connection OptionalInstall scale Install Ink Cartridge Press Enter. Please wait about 2 minutes Create a Test Print Prepaid Account Congratulations! Your meter is operational Updating Your SoftwarePage If You Need Assistance Contact ListPage Phone Connect Phone Cord3Connect Power Install scaleInstall Ink Cartridge Connect Power4Install Ink Cartridge Create a Test Print 6Connect to Pitney Bowes Data Center 5Create a Test PrintPrepaid Account Updating Your Software No Dial Tone TroubleshootingContacts Page AW31214REVF