Pitney Bowes K700. K7M0 manual Connect Phone Cord

Page 21

Alternative Method: Using Analog Phone Line

1 Connect Phone Cord

Phone

ATTENTION

Some commercial phone systems use digital lines that may damage the meter. Like the meter, most fax machines, credit card readers and modems also require analog lines. The meter can share a line with these devices. When in doubt, ask the person responsible for your phone systems.

Connect the phone cord to the meter and the other end to an analog phone line.

The following are usually analog lines:

Fax lines

Lines used by modems or credit card readers

Residential phone lines

If you are using a DSL line you should use a DSL filter obtained from your DSL provider.

Note: For printing postage, the meter does not have to be connected to a phone line. However, if you add funds frequently, we recommend you keep it connected to an analog phone line.

17

Image 21
Contents Install Guide Contents Read This First Page Two power outlets Preparing for Installation3Connect the Communication Device to your Internet source Locate the Communication Device and Network Cable5Check LED 4Apply power to Communication DeviceConnect the meter to a power outlet Installation Part 1 Set Up Communication Device To enter special settings Special Network SettingsMeter Installation Wireless Connection OptionalInstall scale Install Ink Cartridge Press Enter. Please wait about 2 minutes Create a Test Print Prepaid Account Congratulations! Your meter is operational Updating Your SoftwarePage If You Need Assistance Contact ListPage Phone Connect Phone Cord3Connect Power Install scaleInstall Ink Cartridge Connect Power4Install Ink Cartridge Create a Test Print 6Connect to Pitney Bowes Data Center 5Create a Test PrintPrepaid Account Updating Your Software No Dial Tone TroubleshootingContacts Page AW31214REVF