Pitney Bowes B700 quick start Tab

Page 5

B700 Installation Instructions

c.Hold the cassette with the rib- bon side down and the cutout aligned with the printhead. Align the locating tab on the right side of the cassette with the groove in the cassette compart- ment.

d.Rest the cassette on the deck and push it back into the ribbon compartment as far as it will go.

e.Press in on the top of the cassette near the locking tab to snap it in position.

Close the cassette compartment door. This completes ribbon loading.

C

Locating

 

Tab

Printhead

 

Cutout

 

B

 

Printhead

Groove

D

 

E

 

Page 3

Image 5
Contents Read ME First Important Safety Notes Quick Tour of Your New Meter Unpack Shipping Carton and Check ContentsInstall the Ribbon Connect the Power CordTab At the Meter Unlock the MeterPut Postage in the Meter At the Phone What You Do What You HearCompleting the Refill at Your Meter Direct Distribution AssistanceMake a Test Imprint Install the StackerPlace the Quick Refer- ence Guide in the Meter Printing PostageHelp Us Serve You Better Optional FeaturesFor More Information Does the back of your meter look like this? One Elmcroft Road Stamford, Connecticut