English
Printout: When an ORG data memory is activated and a print template is stored, values are accepted when you press the Print key and generates a print command. Only the organisation data containing an input are printed out.
Show content: Press the ORG key. Press the ORG key repeatedly to scroll through the assigned ORG data memories.
Delete the content: Press the ORG key repeatedly until the data memory to be deleted is displayed. Then press the C key to delete the data memory content in decades.
2.7 Switching between scales
Switching between several connected scales.
Up to two measuring points can be mounted in the Digital Indicator 3020. Toggle between the measuring points by pressing the INFO key followed by the ORG key (in succession). The activated measuring points are switched one after the other.
The display shows the number of the activated measuring point on the right of the symbol bar.
Press the Info key to display the calibration and scale data of the activated measuring point.
2.8 Unit
Displaying the weighing result in a second unit.
The unit in the display pane is defined in Setting mode during calibration. You can activate or deactivate the display of the second unit in the additional indicator.
To achieve this, assign the "Second unit" function to the F key (see Setting mode). Press the F key to switch the second unit on and off.
Define the second unit in Setting mode for each connected scale.
For information on the Setting mode, see the detailed CD manual.
11