English
3.2.8 Assigning and clearing the consecutive number
Every input in the total memory is assigned a
Optionally, you can default resetting the consecutive number in Setting mode:
-deactivated (no reset = factory setting)
-when the Clear Total key is pressed.
-when the appliance is switched off.
3.2.9 Item counter
The item counter only counts operations that are actually totalised.
The item counter is incremented by 1 each time a new operation is selected by pressing the F key or an automatic totalisation takes place. The item counter runs up to 999, then comes an error message. The item counter is automatically zeroed when the total is cleared.
3.2.10 Print-command keys
The Info and F keys can execute voucher printout.
This is dependent on whether a print template was assigned to the key in question.
3.2.11 Displaying the current totals
During a totalising operation, you can display the totals reached by pressing the Info key and then the F key.
3.2.12 Display options with the Info key
When you press the Info key, you have the following options:
F= Displays the current content of the total memory Tare key = Displays the current tare weight
20