Soehnle 3020 manual Application programs, Selecting an application program, Weighing and taring

Page 13

English

3.0 Application programs

The various application programs of the Soehnle Program Terminal 3020 offer you numerous solutions for your weighing operations.

You can adapt the application programs to your specific needs in Setting mode. Please refer to the detailed manual on the CD under the heading "Setting mode".

Below is a list of application programs available to you:

1.Weighing and taring

2.Totalising and batching

3.Counting

4.Checking

3.0.1 Selecting an application program

Switch the appliance on. After the power-on routine, the appliance starts the last activated application program automatically.

Call the Setting menu by pressing the Print and F keys (simultaneously)

• The arrow points to "Program Settings".

• Press the Print key: the arrow points to "General".

• Press the Print key: the arrow points to "Programs".

•Press the Print key: the arrow points to the program last selected.

•Select the program you wish to activate by pressing the Tare key or F key.

•Confirm the program by pressing the Print key.

3.1 Weighing and taring

Basic functions: Weighing and measuring gross and net weights.

Warning: This description applies to the options Autotare and Additive tare in the factory setting OFF. When you activate these options in Setting mode, it affects the procedures described.

3.1.2 Display view

Basic weighing view

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 3020 English ContentsDescription of the appliance Technical dataOperating concept, keys and display symbols Installation and commissioningSetting mode Program settings Terminal Scale Data processing ServiceNavigation in Setting mode Program modeFunction key Input and control keys Symbol for standstill Symbols in the display symbol barDisplay Basic functions Power on/offSelecting a program X10 display ZeroingZero tracking Approvable scaleOrganisation data identifiers Content inputDescription input Unit Switching between scalesAlphanumeric input Input procedure Numerical boxesTypes of input box Activating input boxesSelecting an application program Application programsWeighing and taring Display viewManual taring Weighing without taringTaring by manual tare input Additive tare Entering tare weights into the fixed tare value memoryProvisional tare Automatic taringCalling up the list of fixed tare value memories for taring Changing or overwriting a fixed tare value memoryClearing an existing fixed value Error Error message when taringWhen you press the Info key, you have the following options Display options with the Info keyFunction key Totalising and batchingTotal memory with several connected scales Taring Clip off factor when totalisingOperating the totalising functions Selection options for total displayAssigning and clearing the consecutive number Print-command keysItem counter Displaying the current totalsCounting Determining the reference weight Function key F RefCounting display view Counting functionWeight display during the counting operation Displaying the reference weightFixed value memory for reference weights Terminate the count operationCounting with several weighing platforms Check display view CheckingFurther information English English Soehnle Professional GmbH & Co. KG
Related manuals
Manual 28 pages 25.97 Kb
Top Page Image Contents